CE-LS Euro Connector (Large) Male 2pcs&Female 10pcs.
CE-LF Euro Connector (Large) Female 10pcs.
CE-LM Euro Connector (Large) Male 2pcs.
4.0mm diameter, traditional straight laminates offer up to 30% improved efficiency
Gold plated connectors, large contact surface
Hex female connector is convenient to attach on battery’s surface.
First pictures of brand-CS-ELECTRONIC 1:5 High Class RTR Monster Truck.
With the T-REXX 4WD CS-ELECTRONIC increases in the market for large models. In cooperation with Himoto was in the last 2 years, a car developed, tested and production stage further optimized. Sponsorship for the new T-REXX by CS-ELECTRONIC stood a 1 / 8 Buggy competition, for years a mature technology in chassis and drive together. On the other hand, we were also important, a beautiful filigree model for the state of the art to construct. Stability and robustness claimed at important parts, weight reduction and good design in functional parts optimize each area at the model. Perfect handling and best quality guarantee full of fun with the T-REXX as a high-class RTR FM with a remote control fahrfertig shipped from the factory. Whether a beginner or professional, everyone comes immediately with the T-REXX cope.
Inferno GT2 Readyset Corvette C6R
Red Bull Audi A4 DTM
31816B/31817B READYSET
Available: September 2008
The new GT2 is the latest in a popular series of big 1:8 scale nitro-powered cars based on the 7-time IFMAR World Champion Inferno line from Kyosho. The Inferno series has been at the center of the RC racing universe for over 20 years and is the standard by which all other cars are judged. Much of the same technology that earned an unprecedented seven World Championships is incorporated into the design of this new on-road Inferno. The GT2 builds on the popular features of the original GT and adds a number of new features that increase value, durability, user friendliness and speed, not to mention enhancing its unmatched scale appearance.
The 801Xt is a 1/8th scale competition level assembly Truggy kit, designed and tested in Southern California, USA. The highly efficient drive system comes from the optimized placement of the front and rear propeller shafts. The drive-line is virtually straight, which offers the most efficient drive-line possible in its class. The 801Xt chassis has plenty of adjustability to fine tune it for the most demanding of race tracks across the globe. TRF drivers from all parts of the world will be piloting this new competition level Truggy in the coming months in an effort to exploit its potential and further develop the new line of 801Xt options soon to come!
Sharp running of direct drive charm
It is the assembly kit of the electromotive RC car where the motor pinion drives the spur gear directly, can enjoy the sharp running only of rear [dairekutodoraibu]. The chassis constitution which combines the upper deck of half type to FRP make [rowadetsuki]. The front left and right independence of [kingupinkoiru] spring system, the FRP make T bar present appearance it controls the rear with the friction plate and the coil spring. The constitution which applies the load on the rear wheel which loads 540 type motors onto the height adjustment type body, as for the 7.2V battery for travelling loading onto the rear approaching, becomes the driving wheel. In addition, standing upside down mounting steering wheel servo, isometric conversion the tie rod left and right. The steering wheel quality which does not have [kuse] is produced. It is easy to assemble with simple constitution, due to the lightweight body the sharp running and long haul travelling it can enjoy. Polycarbonate make body, front and back wing attachment.
TT-01 Type-E Chassis, will be available Jun 28, 2008
The machine for the one make-up race of the highest peak
It is developed for highest peak “Porsche super-cup” of the one make-up race that has been held in ten countries in the world, and delivery 911GT3 cup car in a private team. Porsche especially manages the machine, and the assembly kit of the electric radio control car that reproduces VIP car that guest players drive at each race. The modeled body is made of the polycarbonate to enough actually feeling as for the form with power. It can enjoy the light lighting by setting high luminance LED of two headlight lights (white) and two rear light lights (red). Moreover, the logo etc. of the pinstripe and the Porsche of gotten Gold and white were prepared in a chic black color in the sticker.
Due for release this fall, we thought we would release some current pictures of the latest production Hyper 9.
Still under testing by team drivers around the world such as Jeremy Kortz (USA), Robert Battle (Spain), Borja Hernandez (Spain) and Graham Alsop (UK) the Hyper 9 is already looking a safe bet to improve upon the outstanding performance, quality and value that has made the Hyper 8/8.5 an outstanding success and current EFRA European Champion.
With a whole host of innovative performance minded design features from US lead designer Tim Bump, the Hyper 9 promises to be well worth the wait.
MBX SERIES. COMING…
We are pleased to announce about our new 1/8 GP Buggy Car MBX-6! The release date is not fixed yet, but we will update more detail about new car on this site.
Source : Mugen Seiki
Longer Cap
The 1/8 buggy class is the most demanding class in RC racing when it comes to durability. The ever increasing power of the 3.5cc motors we use means the drivetrain parts in a buggy have to withstand enormous loads. With track designs also more and more extreme, the tracks today are often more supercross style, which means that the demands on the equipment continues to rise. The new outdrive longer cap is well designed to prevent the drive shaft from dropping out.
RCeasy 中文版
