XRAY – New Touring Car T2 009

XRAY has been viewed as the highest quality touring car available since it entered the RC car scene in 2000. Now with a long and distinguished history of racing achievements and ground-breaking, award-winning innovations, XRAY is proud to now offers the T2’009… the most advanced RC touring car on the market today… a top-quality “no-compromise” engineering marvel designed to put you in the winners circle.

Revolution, evolution, optimization… those are the key terms that describe how the T2 platform came to be over the last few years. XRAY Research & Development along with the Factory Team devoted themselves to extensive testing, all in the effort to bring the consumer the latest evolution of the successful T2 platform.

With the fast paced rule changes in touring car, the main focus of the T2’009 has been to evolve & optimize. To take on what the world can offer and outperform all others under any racing conditions with any rules. Take your pick — asphalt, carpet, rubber or foam tires, NiMh or cutting edge LiPo batteries, high performance brushed or brushless motors — the T2’009 can handle them all and dominate the competition in the process. No extras needed… just a desire to win.

Pure design. Pure racing. Pure adrenaline.

Dipl. Eng. Juraj Hudy
Chief Engineer, XRAY

Tamiya USA – High Performance Drift Spec TB03D Chassis Kit

Sharp and precise of drifting can be experienced through this TB-03D shaft driven 4WD chassis kit. The front damper stay has been changed and is equipped with a normal type suspension system. Comes with 18 spoke black metal plated wheels with Super Driftech Tires! Furthermore the body is ready for you to customize with a rich assortment of Hop Up and drift specific parts. This is the chassis to have for all you drift fans out there!

• New design H Parts (Mirror, Wiper).
• New design J Parts (Exhaust, Intercooler, Brake disc-shaped wheel hub).
• New design N Parts (Suspension mount).
• Short reversible suspension.
• 1050 Bearing Uprights (F/R).
• Super drifttech tires (24mm width) included.
• Motor, ESC, 2-channel R/C system, 7.2V battery and charger separately required.

Source : Tamiya

Kyosho – New Mini Z ASC Bodies

No. MZP410FA-B Formula D Team Falken
No. MZP410RE-B Formula D Team Retaks

Available: Now

Kyosho is proud to announce the release of two New ASC bodies for the MA-010 AWD chassis. These New Formula D replica bodies come with all the detail that you would expect from Kyosho’s ASC series. Both bodies come with additional headlight buckets so you can change your cars appearance in a flash.

Kyosho – New AWD Mini Z Lancer EVO. X

No. 30569MR-B Lancer EVO. X Ready Set
No. 30569PW-B Lancer EVO. X Ready Set

Available: Now

The advanced design combines a shaft driven AWD with a precision 4-wheel independent suspension using a king-pin and strut system in an ultra-compact chassis. The addition of newly designed front and rear differential units using crown and pinion gears produces high efficiency drive performance with similar low levels of resistance to the existing 2WD version. Also, the addition of the AWD drive train hardly increases the weight of the chassis at all, enabling the benefits of AWD to be realized without any downside. The final result is a powerful chassis with awesome handling.

Tamiya USA – F103R Chassis Kit – F103 15th Anniversary

Celebrating 15 Years of the F103

In celebration of the 15th anniversary of the first release of the R/C F103 chassis, Tamiya is releasing this new lightweight, east to build, limited edition model. The new carbon fiber 3.2mm lower and 1.5mm upper plates feature special pad printed logos. This car comes fully loaded with exclusive parts including newly designed aluminum sever mount,aluminum upper deck posts, durable T-Bar bridge, and Teflon-friction plate, making it a great addition to your R/C Collection.

Tamiya USA – TRF416 Chassis Kit – World Edition

This year has seen the R/C TRF416 fly off to a winning start at the Euro Touring Series. At Round 1 of the Euro Touring Series, it won 2nd place, then at Round 2 and Round 3, recorded back to back 1-2-3 podium finishes and has not looked back! Now, unbelievably, Tamiya has come up with some new improvements making this machine perform even better.

About the Item’s New Changes

The following changes have been made to improve the vehicle’s balance and roll charateristics:

• The carbon lower deck comes in the same thickness but has a new battery position.
• The carbon upper deck is integrated with the rear upper brace for improved flexibility.
• The new motor mount also features redesigned sections and can provide excellent support to high spec motors.
• The large sized urethane bumper closes the gap between the chassis and body reducing battering. (It is necessary to cut to size for smaller chassis vehicles)
• New front and rear drive belts.
• Short reversible suspension arms with reversed suspension mounts.
• Front Direct Cup
• Teflon sealed ball bearings.
• High Lubrication Dampers.
• R/C system, body, tires, motor, esc, battery & charger separately required.

Tamiya – Jeep Wrangler – CR01 Semi Assembled Model

Tamiya is proud to introduce the newest member to the CR-01 rock crawling family, the Jeep Wrangler. This 1/10 R/C Jeep Wrangler is mounted on the impressive CR-01 chassis and the injection-molded plastic body shell precisely captures its famous form. It comes semi assembled making it perfect for those who would like to assemble their machine, but who do not have the time to do a complete build. As the beadlock tires, planetary gears, and the universal shafts are all pre-assembled, it greatly reduces the number of hours required for assembly allowing you to enjoy the fun of rock crawling more quickly.

Hot Bodies – 12X Kit

Translation :

The world spec that studied evolution thoroughly.
“HB 12X” Debut decision in IFMAR world championship in 2008.
“Cyclonic 12″ that has given a creditable showing with a lot of Biccibent Modefais each part after it puts it on the market of August, 2007, it becomes “HB 12X”, and it appears.
It depends in the adoption of a lot of new design parts, and “HB 12X” that obtains aggressive movement brings you victory.

HPI – Cyclone D4 – Graphite Upper Arm Mount Set

The installation position increases because it changes from the upper arm mount of the kit standard. Installing the upper arm on a lower position by assuming made of graphitized the material, and adjusting Single In-line Memory Module between the gear boxes became possible.

Source : HPI

Tamiya Japan – Rising Fighter

Available : Nov 1, 2008

Translation :

It is funny, the RC buggy!
It is the assembly kit of the electromotive radio control 2WD buggy which it is easy to handle with simple structure, the light running with ease can enjoy. The reality which uses the precise die which is similar to the scale model as for the co-cured body which overflows the ABS resin make whose strength is high. Also the driver doll being reproduced, mood is raised. Be able to paint both with the paint for the plastic model, also the fact that it finishes in the original color is the pleasure. As for the off load the rising fighter of the 2WD buggy which can be played of course fully even with on load, the RC car will be begun from these 1 units.