HPI Cyber 10B

The HPI Cyber 10B Picture from HB Buggy Blog

Protoform – LTC-R 190mm Touring Car Body

Available in Normal and Lightweight Version

The much-anticipated PROTOform LTC-R is now available and ready to lower your lap times! This Global Body Spec ready race body is designed specifically for rubber tire racing whether it’s on a carpet or a paved surface racetrack. It was designed with slightly more steering ability than the all conquering PROTOform Mazda 6 and MazdaSpeed 6 body styles – yet less aggressive than the PROTOform R9-R body. To further aid balance and rear grip the wing mounting location that’s slightly more rearward. The LTC-R features two trim lines – one for IFMAR/EFRA/ROAR/JMCRA racing at the 115mm height as well as the BRCA’s 120mm height rule. The oversize rear wing helps performance on a poor-grip surface that’s commonly experienced in club racing but also incorporates trim lines for sanctioned style racing. The LTC-R is available in 2 different weights of genuine lexan and comes with protective film, decals and wing mounting hardware.

Tamiya – F103RM with Body

Features :

• Front suspension uses independent king pin coil spring.
• Rear suspension uses friction dampers and coil springs which are attached to a durable T-bar.
• Ball Differential.
• Full ball bearings.
• Longitudinally placed servo also applies an isometric steering load.
• Lightweight diff joint.
• Height adjustable gear case.
• Rear suspension ball mount.
• Transparent polycarbonate body.
• Front and rear wings.
• ESC, 2-channel R/C system, 7.2V battery and charger separately required.

Tamiya – Super Clod Buster Kit – Metal Plated Special

This famous monster truck now comes in a special edition that features a brilliant metal plated body. The Super Clod Buster features a twin-motor dual gearbox 4WD drive train, a durable link-arm, 8 coil springs and massive 165mm dia. tires for powerful and efficient performance to overrun any obstacle

• Twin-motor dual gearbox 4WD drive train
• A durable link-arm and 8 coil springs support the massive 165mm dia. tires
• Also features a load of metal plated detail parts including front grill, air-intake, roll bar, wheels and front and rear bumpers.
• Motor and Electronic Speed Controller included.
• Includes PTC safety switch to reduce possibility of overheating.
• Resistor comes pre-assembled.
• 2-channel R/C system, 7.2V battery and charger separately required.

Source : Tamiya

RC Racing Series 3 Episode 1

RC Racing Series 3 Episode 1 from Nick Daman on Vimeo.

Tamiya Japan – The BOOMERANG 2008

Available : Dec 13, 2008

Translation :

The vivid wedge Supreme Headquarters Allied Powers, Europe forum which makes running feel
The intense wedge Supreme Headquarters Allied Powers, Europe line which is formed with the body and the large-sized rear wing just the boomerang. It is reissue edition of the boomerang which appeared in 1986 as a 4WD racing buggy for enrollment, instantaneously gained popularity. The section [huainchiyun] was done e.g., basic constitution that way, equips the ball bearing and the thrust ball bearing inside the gear box, sets the chassis cover which raises the reliability of the running with the off load anew.

HPI – RTR Spring 2 Flux with Ford Mustang GT-R

Unleash the all-wheel-drive beast, the ready-to-run Sprint 2 Flux brushless 1/10th scale 4WD touring car is here! The Flux Brushless System takes the durable Sprint 2 platform to the next level with amazing performance from brushless motor technology. The Sprint 2 Flux is our most reliable onroad chassis – the workhorse of the HPI touring car line-up, built with indisputable HPI durability.

The Sprint 2 Flux is available in two different flavors, so you can choose your favourite era of racing:

For the pure Vintage look, you can choose the #100424 kit with the classic ‘66 Ford Mustang GT #17519 bodyshell, #3808 & #3813 vintage 8 spoke wheels (with 31mm wide wheels in the back) and grippy period-correct #4793 & #4797 Vintage Racing muscle car tires!

If you’re more into the ‘modern retro’ look, look closely at the #102221 kit, fitted with the awesome Ford Mustang GT-R concept #7268 bodyshell, #3842 slick Volk Racing TE37 6-spoke chrome wheels and our famous #4790 X-Pattern racing tires!

Team Losi – RE11 1/8 Race Exhaust System

Designed for mid- to high-power .21 and .28 nitro engines, the Losi RE11 exhaust system is dyno-tested and tuned for reliable performance that can be backed up anytime.

Features

• Better mid- to top-end power
• Smooth lineal power band
• Hard-anodized black finish dissipates heat better
• Reinforced exit tube minimizes damages from impact
• Dyno-tested and tuned for reliable performance
• Designed from mid- to high-power band .21 and .28 engines
• Easy to drive on slick tracks

Source : Team Losi

Tamiya Japan – TRF416 World Edition

Available : Dec 6th, 2008

Translation :

Reality! Running of champion
Ever since debut win with touring car all the Japanese championships 2007, TRF416 which repeats victory with famous race/lace of the world. Feeding back the data which is cultivated with big race, in order that it conquers IFMAR world championship, the version which evolved the section is TRF416 world edition. Adopting the long carbon upper deck of dress type. As gives the pliant roll quality, efficiency of the control tire is pulled out to the maximum, it made kind constitution in the tire. The underside equipping the TRF special damper which administers high lubricating HL coating to the short reversible suspension arm. In addition, you adopt the new material which pursues the rotary efficiency in the extremity limits to the drive belt, assure also the rise of drive efficiency. Furthermore, high power it corresponded to also the brush less motor, from the motor mount made the new type which raises rigidity. The TRF416 world edition where this update hits beautifully, the ace driver of TRF, brings the IFMAR ISTC class champion of the world to the Mark Rheinard player. It is the pure racing model which can realize the running of the champion.

* It was held in tie Bangkok ‘with IFMAR ISTC electromotive touring car world championship’, using TRF416 world edition, ISTC class champion acquisition!

Active Hobby – A210 Dual Sports – Nissan Fairlady 240Z

Develop from the success of A210SS, the new version of Active Hobby A210 DS (Dual Sports) – Nissan Fairlady 240Z.  Available in RTR and ARTR(semi-finish) version.   RTR version will be available on 2009 Jan and ARTR version will be in 2008 end of December.