Archive

Archive for February, 2009

Kyosho – Mini Z MR-02 MM Semi-Complete Chassis Set

February 28, 2009 rceasy Leave a comment

30450spa

Kyosho – Mini Z MR-02 MM Semi-Complete Chassis Set (Limited Edition : 1000 pcs)

Available : Mar, 2009

10th Mini-Z Anniversary Special Edition
Full Option include and Ready to Race.

Translation :

It is a race including the Mini-Z cup, and the chassis that can aim at victory by a specification as it is is a Mini-Z cup edition. Optional parts that do choice so that a lot of Mini-Z drivers may win at the race are equipped normally from the beginning. Parts and the durability to raise the setting degree of freedom are made further and the option etc. are fully loaded from parts that improve efficiency. Moreover, special parts (There was no single goods sales schedule) that gave the red anodized aluminum only of this machine were distributed to each place, and it finished it up by a special specification that understood at one view. The change from the machine where the favorite was accustomed to start is possible receiver & amplifier unit because it is not attached. Receiver & amplifier unit on hand can have been made the best use of, and it enjoy a special running. Please grip only 1,000 chances to the hand by all means in the world.

Read more…

Categories: Kyosho Tags: ,

Kyosho Mini Z Monster – Dodge Ram 1500

February 27, 2009 rceasy Leave a comment

169_main_lg

No. 30086MB-B Dodge Ram 1500 Metallic Blue
No. 30086GM-B Dodge Ram 1500 Gun Metal

Available: In Stock

The Dodge Ram is no doubt one of America’s all time favorite trucks along with the Ford F150 and the Chevy Silverado. The Ram’s distinctive beefy looking front grill and hood lines have been fully reproduced in all their glory. This big tire machine built on the proven Mini-Z chassis, boasts performance never experienced before. With plenty of suspension travel, you can turn the smallest of spaces into an off-road obstacle course. Run right over a mountain of magazines, an undulating carpet section, or rocky section built from some old news papers. Set up a spectacular jump or control wheelies at will. With an optional motor you can add even more grunt for higher jumps and quicker pop for your wheelies.  With big trucking performance in a small package the Mini-Z monster truck creates a new indoor motorsports category. Now you can gather your family and friends together and start an off-road revolution in your living room!

Read more…

Categories: Kyosho Tags: ,

Yokomo – MR-4TC BD5 Preview

February 27, 2009 rceasy Leave a comment

bd5

Yokomo – New Touring Car MR-4TC BD5
Will be availabe on Mar 24, 2009

チームヨコモのチーフメカニック海野とトップドライバー達が作り上げた結晶がいま、レースシーズンに向けて発進します。 ハイスピード化が進む現代のレースシーンにおいて”勝てる”マシンを作ることは容易ではありません。ただ1周のラップタ イムの速さだけではなく、ドライビングにおける安定感やメンテナンス時の整備性までも考慮し、様々なドライバーがレースに おいて最高の結果を得られるマシンこそ、我々ヨコモの考える”勝てる”という性能であるからです。

Now we have made crystal Unno and chief mechanic of the top drivers CHIMUYOKOMO to pull away for the racing season.   In scenes of high-speed race in the modern era of “win” to make the machine is not easy. But a lap RAPPUTA Im not the only speed, and also to improve the stability and maintenance of driving a variety of racing driver Machine that can get you the best results, we think the Yokomo “win” from the performance.

Read more…

Categories: Yokomo Tags: ,

Tamiya Japan – Brushless 12T Motor and ESC01 Set

February 27, 2009 rceasy Leave a comment

45039

Tamiya Introduce the new TBLM-01 12T Brushless Motor and the TBLE-01 Brushless ESC 01

Translation :

Brushless motor and is being touted as the next generation power sources. By placing a magnet on the inside of MOTAKAN, motor brushes are now equipped with a brush to change the direction of electricity flow through the rotor coils wrapped. The brushless motor is placed inside the coil MOTAKAN, the rotor is equipped with a magnet. The speed controller (ESC) and change the direction of electricity flow through the coil built into the electronic circuitry. It does not have to brush supplies, essentially maintenance free. Moreover, there is no point of contact, such as electrical and mechanical brush KOMYUTETA and low noise so that no spark, also features a high-speed rotation possible.

Read more…

Categories: Tamiya Tags:

Kyosho – Black Pit Box and Parts Box

February 26, 2009 rceasy Leave a comment

168_main_lg

Kyosho’s best kept accessory secrets are not just for racers any more, new Kyosho accessories are here and available to the masses!

No. 1776BK Kyosho Pit Box (Black)
Keep it together with the Kyosho Pit Box, now you don’t have to dig through a cardboard box to find your tools. The Pit Box has 3 different storage drawers with different sized compartment to accommodate for any and all your tools and accessories.
Read more…

Categories: Kyosho Tags:

HUDY – Pit Bag

February 26, 2009 rceasy Leave a comment

hudy_pit_bag

HUDY once again leads the pack with innovation in all areas of RC racing. Not your standard pit bag, the HUDY Pit Bag is the first purpose-designed pit bag that is super lightweight, easy to assemble/disassemble, and is very easy to transport within the outer pockets of your hauler bag (or stored in any regular bag or box). Finally there is a pit bag that is completely unique, new, and purpose-designed for all nitro RC car drivers and mechanics of on- or off-road racing in 1/8 and 1/10 classes. Typical HUDY smart innovative design.

Read more…

Categories: Hudy Tags:

Reedy – 2400mAh and 3400mAh Stick Pack LiPo Batteries

February 26, 2009 rceasy Leave a comment

714

The rounded stick pack profile of Reedy’s all-new 2400mAh and 3400mAh LiPo batteries means they are a perfect fit in cars that accept stick packs exclusively such as Tamiya M-chassis vehicles. However, their universal size means that they can fit in any electric vehicle that accepts 7.2V NiMH stick battery packs. An additional design characteristic is the single cell “humps” that key into chassis that accept NiMH batteries in a side-by-side configuration.

Economically priced, both packs are perfect for spec class competitions due to the fitment in a wide variety of cars. A Tamiya-style connector with 12AWG wire comes standard, but the connector is easily changed to accommodate individual requirements.

Reedy covers all levels of competition with LiPo batteries that fit every racer’s budget and performance requirements.

Read more…

Categories: Reedy Tags:

Hot Bodies – D8 Lightweight 4mm Main Chassis

February 26, 2009 rceasy Leave a comment

67533_01

Increase the potency of your D8 buggy with this special machined lightweight chassis. Strategically milled out to reduce weight in non-critical areas, you can drop some serious weight exactly where you need it while maintaining the integrity required for a stiff racing chassis.

Drop the weight and pick up those tenths of a second you need on the track!

Source : HB

Categories: Hot Bodies Tags: ,

EDIT – Pure Silicone Shock Oil

February 25, 2009 rceasy Leave a comment

ed191000_01

Edit Pure Silicone Shock Oil is the ultimate race-proven match for the most modern of today’s top-end racing shock absorbers and dampers. Edit shock oil will not thicken at low temperatures or thin at high temperatures, making it ideal for every racing application from indoor 1/12th and micro to rallycross buggy and touring car.

Supplied in convenient 60cc bottles to let you take the full set in your pit bag. Easy screw-off tops and narrow tips let you add exactly the right amount of oil to fill or top-up your shocks.

  • #ED190150 Pure Silicone Shock Oil 150cst (60cc)
  • #ED190200 Pure Silicone Shock Oil 200cst (60cc)
  • #ED190250 Pure Silicone Shock Oil 250cst (60cc)
  • #ED190300 Pure Silicone Shock Oil 300cst (60cc)
  • #ED190350 Pure Silicone Shock Oil 350cst (60cc)
  • #ED190400 Pure Silicone Shock Oil 400cst (60cc)
  • #ED190450 Pure Silicone Shock Oil 450cst (60cc)
  • #ED190500 Pure Silicone Shock Oil 500cst (60cc)
  • #ED190600 Pure Silicone Shock Oil 600cst (60cc)
  • #ED190850 Pure Silicone Shock Oil 850cst (60cc)
  • #ED191000 Pure Silicone Shock Oil 1000cst (60cc)

Source : EDIT

Categories: EDIT Tags:

MuchMore – Soldering Station

February 25, 2009 rceasy Leave a comment

solderinstaion_1a

New Soldering Station is your third hand to help difficult soldering job for Euro style connector and ultra plugs etc.

8 holes on top hold tight 8 different types of male & female connectors.  It has a slot to place a ultra plug and a thumb screw with a guard to secure it when it is soldered.   4 rubber stands under the station prevent slips.

Read more…

Categories: MuchMore Tags: